Opis:

2019 Boston Whaler 345 Conquest

THE UNSINKABLE LEGEND !!! THIS BOAT WILL NOT SINK!!!! FOAM FLOATATION A vessel can be kept afloat using solid installed foam. Recall the Boston Whaler commercials where a tender is cut into thirds and remains afloat with a person in each section? However, the drawback to using installed foam in a cruising boat is quantity or volume of foam needed to keep a flooded displacement hull afloat. SO IMAGINE THE FOAM BOSTON WHALER ADDS TO MAKE THIS CLAIM!! A 30,000-pound boat, (a common displacement for a 45-foot to 50- foot passagemaker) would need nearly 500 cubic feet of solid foam within the hull to keep it from foundering when flooded. Fitting 500 cubic feet of foam into a yacht's hull would be a feat, requiring every nook and cranny to be filled since 500 cubic feet equals a space nearly 20' long, eight feet wide and three feet high. To keep such a boat afloat, foam three inches thick inside the entire hull would be needed, and that would only support the boat to its gunwales.

Meet the boat that reimagines the possibilities for onboard space: the 2014 NMMA Innovation Award-winning 345 Conquest®. Known for its sleek and sophisticated styling as well as the award-winning Dynamic Cabin System—a forward-berth dining table that seats six adults and converts into a plush queen-sized bed with the push of a button— this Conquest all but ensures the captain will never cruise without company. Yet, as comfortable as it is, the 345 Conquest is also a serious offshore fishing boat, with amenities and options to fit any seasoned angler’s needs, inspiring confidence with any adventure. Step aboard the 345 and see how smart a walkaround boat can be.

• Triple Mercury FourtStroke Verado® engines with Joystick Piloting provide impressive power and control.

• The well-appointed head features a stylish porcelain sink and stainless-steel accents.

• Convenient cockpit prep station with optional flip-top grill, huge storage and YETI® cooler.

• Rod storage above the settee in the cabin holds gear securely.

Features may include:

• All rails welded 316-L stainless steel

• All hardware 316-L stainless steel

• Vinylester barrier coat over entire hull and hull sides

Deck / Cockpit

• 10” stainless steel cleats – bow (2), stern with hawse pipes (2 – 1 per side), spring line (2), bow pulpit (1)

• 10” stainless steel pull-up cleats – cross tie cleats at transom (2)

• 28” interior freeboard

• Blue LED courtesy lighting in cockpit

• Bow and stern eyes

• Bow pulpit with stainless steel roller assembly

• Cockpit coaming bolsters

• Covered telescoping swim ladder with stainless steel grab rail

• Downrigger weight holders (2 per side)

• Forward deck mounted stainless steel rod holders (2)

• Freshwater transom shower with hot and cold water

• Gunnel mounted stainless steel rod holders (4)

• Hawse pipe with integrated drink holders (2)

• Heavy-duty rub rail

• Motor well drains

• Self-bailing cockpit

• Toe rails – cockpit stainless steel port and starboard (2)

• Transom door – 1.5” acrylic with stainless steel latch

• Transom mounted stainless steel rod holders (3)

• Welded stainless steel bow rail

Starboard Cockpit Wet Bar

• Hinged solid surface lid with recessed insulated cooler below

• Integrated cup holders and storage compartment

• Pull-out drawer storage compartment on starboard cockpit wall with 5-gallon pail (replaced by 1.75 cubic ft refrigerator when freezer option is selected)

• Receptacle (120-V)

• Refrigerator / freezer – stainless steel 12-V / 120-V, 2.3 cubic ft (replaced with 1.75 cubic ft and relocated to cockpit when freezer option is selected)

• Sink with pull-out faucet (hot and cold)

• Stainless steel handrail

• Stereo remote control – Fusion®

• Wet bar with solid surface counter

Port Cockpit Prep & Entertainment Center

• Dedicated cooler storage with cooler slide (35 qt Yeti® cooler included)

• Drawers (2)

• Pull-out footrest for aft facing seat

• Pull-out prep area with solid surface, hinged cutting board, storage compartment and electric grill